Electric Pressure Transmitters MPT-003 Series -321014 manufacturer from China Egmec Industry Co., Ltd.

Payment Terms:	T/T,L/C,D/P,WU
Place of Origin:	Zhejiang, China (Mainland)


	Add to My Favorites
HiSupplier Escrow	Share \|

Product Detail

Model No.: MPT-003 Series -321014

Production Capacity: 120000

Product: Electric micro-power pressu...

Max. operation temperature: -40℃ ~ 100℃

Output signal: 0-3VDC

Response time: ≤10ms

Electromagnetic radiation: EN50081-1/-2

Means of Transport: Ocean,Land,Air

Packing: Standard packing exporting

Pressure measurement range: Within -0.1MPa ~ 100-MPa

Power supply: 2.7-3.6VDC

Insulation: >100MΩ at 50V

Pressure port: M20×1.5, G1/2, NPT1/2 optio...

Electromagnetic sensitivity: EN50082-2

1. Output 0 ~ 3Vdc
2. Sleep current less than 2uA
3. Power consumption is less than 4mW

Brief introduction:

MPT-003 series electric pressure transmitters is a micro-power pressure transmitter, it is designed for the operating voltage is 2.7 to 3.6 volts required.
To output signal between 0~3 V dc products supporting terminal equipment, signal processing circuit using high-performance MCU and high-precision ADC and D AC - 1 0 ° C~ 0 ° C temperature compensation can be changed transmitter - 2 0 ℃~8 0 ℃ long-term stability in the 5% F. S-less work, a dedicated digital signal processing circuit without potentiometer adjusted by the control box can be convenient to its zero and full scale
Calibration, calibration and scaling of the range, the scaling of the range of 5: 1.
Through the intrinsically safe explosion-proof certification and C-E certified.

Ordering:

Input signal

Connection type

Pressure portthreads

Addition

B1=0 ~3VDC

H=HIRSCHMANN plug

C=Cableline outlet

GX=Aviation plug

Ga=G1/4 Outer thread

Gb=G1/2 thread

Gc=G1/4 Inner thread

Ma=M20X1.5 face seal thread

Mb=M20X1.5 waterline seal thread

Vd=2.7-3.6VDC

A=Absolute pressure

S=Sealed gauge pressure

Ua=0.25%F.S

Ub=0.5%F.S

M=Intrinsically safeexplosion-proof Exia IICT6

Specification:

Item		Description
Pressure range	Within-0.1MPa ~ 100MPa
Overload pressure	1.5 Times the ratedpressure
Damage pressure	3 Times the ratedpressure
Accuracy	±0.25%F.S, ±0.5%F.S
Stability	Typical values: 0.1%F.S; Max. value: 0.25%F.S
Operationtemperature	-40℃~ 100℃
Compensationtemperature	-10℃~70℃
Compatible media	All corrosive mediacompatible with 1Cr18Ni9Ti
Quiescent operatingcurrent	Current consumption≤ 10m A meter of non- sampling
Output signal	0-3VDC
Supply	2.7-3.6VDC
Insulation	>100M Ω at 50V
Electricalconnection	Thewater outlet ( five waterproof sealed), shell protection IP68
Shell protection	IP67
Response time	≤10ms
Pressure portthreads	M20×1.5,G1/2, NPT1/2
Form of pressure	G= Gauge pressure/ A= Absolute pressure / S= Sealed gaugepressure
Electromagneticcompatibility	Electromagnetic radiation: EN50081-1/-2; Electromagnetic sensitivity: EN50082-2

Dimensions:

Connector type
Plug	4 -Wire	4 -Wire
1	Power supply (+)	Red wire
2	Power supply ( - )	Black wire
3	Out put(+)	Blue wire
4	Out put(- )	Green wire