High Temperature Pressure Transmitters HTT-001 Series -321005 manufacturer from China Egmec Industry Co., Ltd.

Payment Terms:	T/T,L/C,D/A,D/P,WU
Place of Origin:	Zhejiang, China (Mainland)


	Add to My Favorites
HiSupplier Escrow	Share \|

Product Detail

Model No.: HTT-001 Series -321005

Production Capacity: 100000

Product: High temperature pressure t...

Overload pressure: 2 Times the rated pressure

Measurement accuracy: 0.25%F.S; 0.5%F.S

Shell protection: IP67

Electromagnetic radiation standard: EN50081-1/-2

Means of Transport: Ocean,Land,Air

Packing: Standard packing exporting

Pressure measurement range: Within 0.1MPa ~ 200MPa

Damage pressure: 4 Times the rated pressure

Insulation: >100MΩ at 50V

Pressure port: M20X1.5, G1/2, G1/4, NPT1/2...

Electromagnetic sensitivity standard: EN50082-2

1.Good quality of sputtered films cores adopted
2.Withstand 120 ° C medium high temperature
3. A variety of pressure ranges and signal output

Brief introduction:
The serious of HTP-001 high temperature sputtered film pressure transmitter is can be a medium resistance to high temperature of 120 ℃, wide measuring range, high precision products. Widely used in the need to measure the relative dielectric high temperature gas, liquid pressure situations.
The product structure is a welded the shell of raw materials: 1Cr18Ni9Ti stainless steel sputtering film cores, no type "O" ring seal, from the structure to ensure the product is stable and reliable under high temperature sputtered films Core selection of internationally renowned brands, special programmed transmitter conversion circuit, and through the security certification and CE certification.
Two-wire system circulation output leads nonpolar; three-wire voltage and current output type AC and DC.

Ordering:

Input signal

Connection type

Pressure portthreads

Addition

A= 4 ~ 2 0 m A

B=0 ~ 10V

H=HIRSCHMANNplug

I=Aviationplug

C=Cableline outlet

Ga=G1/4 thread

Gb=G1/2 thread

Na=1/2 NPT thread

Nb=1/4 NPT thread

Ma=M20X1.5 face seal thread

Mb=M20X1.5 waterline seal thread

U=7/16 -20UNF threads

La=Gauge with LED

Lb=Gauge with LED and 2 control points

Va=10-30VDC

Vb=220VAC / VDC

G=Gaugepressure.

A=Absolute pressure

S=Sealed gauge pressure

M=Intrinsically safe explosion-proofExia IICT6

Ua=0.25%F.S

Ub=0.5%F.S

Specification:

Item		Description
Pressure range	Within 0.1MPa ~ 200MPa
Overload pressure	2 Times the ratedpressure
Damage pressure	4 Times the ratedpressure
Accuracy	0.25%F.S/ 0.5%F.S
Stability	Typical value: 0.25%F.S/Max. value: 0.5%F.S
Operationtemperature	-50℃ ~ 120℃
Compensationtemperature	-20℃~120℃
Compatible media	All corrosive mediacompatible with 1Cr18Ni9Ti
Electricalproperties	2- lines: 4~20mA 3- lines: 0~20mA /0~10VDC / 12~30VDC 4- lines: 0~20mA /0~10VDC / 12~30VDC
Load resistance	2- lines: (U-10) / 0.02(Ω) 3- lines and 4-lines : Elec. Current: (U-12) / 0.02(Ω) Voltage:>100KΩ
Insulation	>100MΩ at 50V
Electricalconnection	Thewater outlet ( five waterproof sealed), shell protection IP68
Shell protection	IP67
Pressure portthreads	M20×1.5,G1/2,G1/4,NPT1/2,NPT1/4,NPT1/2
Form of pressure	G= Gauge pressure/ A= Absolute pressure / S= Sealed gauge pressure
Electromagneticcompatibility	Electromagnetic radiation: EN50081-1/-2; Electromagnetic sensitivity: EN50082-2

Dimensions:

Connector type
Plug	2 Wires	Cable	3 Wires	Cable
1	Power	Red wire	Power	Red wire
2	Output	Blue/Green wire	Power ground	Black wire
3			Output	Blue/Green wire
4(E)	Shielded	Yellow wire	Shielded	Yellow wire

Pressure portconnection threads
1	M20X1.5	3	NPT 3/8	5	G 1/4
2	NPT 1/4	4	NPT 1/2	6	G 1/2

Form ofsignal output
2- LINES	4- 20mA
3- LINES	4- 20 mA; 0-10 mA; 0-20 mA
	0 - 5VDC; 0.5 – 4.5VDC;1 - 5V; 0 - 10V
4-LINES	4- 20 mA; 0-10 mA; 0-20 mA
	0 - 5VDC; 0.5 –4.5VDC; 1 - 5V; 0 - 10V