Electronic Pressure Transmitter MPT-002 Series -321013 manufacturer from China Egmec Industry Co., Ltd.

Payment Terms:	T/T,L/C,D/P,WU
Place of Origin:	Zhejiang, China (Mainland)


	Add to My Favorites
HiSupplier Escrow	Share \|

Product Detail

Model No.: MPT-002 Series -321013

Production Capacity: 120000

Product: Electronic pressure transmi...

Max. operation temperature: -40℃ ~ 85℃

Analog output signal: 0-5VDC

Response time: ≤10ms

Electromagnetic radiation: EN50081-1/-2

Means of Transport: Ocean,Land,Air

Packing: Standard packing exporting

Pressure measurement range: Within 0.2MPa ~ 35MPa

Power supply: 10-30VDC

Insulation: >100MΩ at 50V

Pressure port: M20×1.5, G1/2, G1/2, NPT1/2...

Electromagnetic sensitivity: EN50082-2

1. Accuracy of 0.25 % F.S
2. Imports of the high stability of the pressure sensor cores

Brief introduction:

MPT-002 series electronic pressure transmitter is the communication of a CAN bus protocol, the use of imported high stability of the pressure sensor core and dedicated CAN bus circuit can be realized CANBUS- based two-way communication.
CAN bus is a multi-master network protocol , the network took a node can be at any one time to take the initiative to send messages to other nodes on the network, the priority of the packet arbitration minimizes the packet transmission delay and avoid conflict. CAN direct communication distance up to 10Km, and communication rates up to 1Mbps.

Ordering:

Input signal

Connection type

Pressure portthreads

Addition

K= CAN Line

H=0-5V

C=Cableline outlet

Ga=G1/4 thread

Gb=G1/2 thread

Ma=M20X1.5 face seal thread

Mb=M20X1.5 waterline seal thread

Vd=3.6VDC

A=Absolute pressure

S=Sealed gauge pressure

Ua=0.25%F.S

Ub=0.5%F.S

Specification:

Item		Description
Pressure range	Within 0.2MPa ~ 35MPa
Overload pressure	1.5 Times the ratedpressure
Damage pressure	3 Times the ratedpressure
Accuracy	±0.25%F.S
Stability	Max. value: 0.25%F.S
Operationtemperature	-40℃~ 85℃
Compensationtemperature	-10℃~70℃
Compatible media	All corrosive mediacompatible with 1Cr18Ni9Ti
Quiescent operatingcurrent	Current consumption≤ 10m A meter of non- sampling
Analog outputsignal	0-5VDC
Supply	10-30VDC
Insulation	>100M Ω at 50V
Electricalconnection	The water outlet (five waterproof sealed), shell protection IP68
Shell protection	IP67
Response time	≤10ms
Communicationdistance	≤1 0 K m
Communication speed	≤1Mbps
Specificationsupports	CAN2.0 A and CAN2.0B
Pressure portthreads	M20×1.5,G1/2, NPT1/2
Protocol support	Support CANopenprotocol and CAN open net
Form of pressure	G= Gauge pressure/ A= Absolute pressure / S= Sealed gaugepressure
Electromagneticcompatibility	Electromagnetic radiation: EN50081-1/-2; Electromagnetic sensitivity: EN50082-2