Lincoln Grease Lubricant Distributor from China manufacturer

Payment Terms:	T/T,L/C,D/A,D/P,WU
Place of Origin:	Zhejiang, China (Mainland)


	Add to My Favorites
HiSupplier Escrow	Share \|

Product Detail

Model No.: JPQS/D Series -221015

Production Capacity: 5000

Delivery Date: Depending quantity

Certification: CE

Product: Progressive Type Grease Lub...

Feeding volume: 0.1-1.0mL/time optional

Working element numbers: 3-20 pcs

Medium: Cone penetration not less t...

Surface treatment: Chrome plated or Zinc plate...

Means of Transport: Ocean,Land,Air;Express

Packing: Standard packing for export...

Type: Others

Brand Name: EGMEC

Nominal Pressure: 160bar

Working element: Above 3 pieces changeable

Working temperature: -10~+80℃

Quality testing standard: JB/ZQ4550-97

Special dimensions design: Consult us

1. Two outlet ports on each element
2. Max. middle elements reach to 10pcs.optional
3. Max. pressure operation: 160bar

Brief introduction:

The JQPS(D) series of grease lubricant distributor are combined with the first element of A, working element M, the end element E to one group , the number of working element can be selected at least three and up to ten per work element with two outlets, so the grease or oil outlets of each distributor group between 6-20piece, and each distributor group 6-20 lubrication points available, how much of the amount of grease oroil needed , according to model specifications data to select proper working numbers.

If a lubrication point in a cycle requires large amount of grease or oil, the method of drawing A3 which can be selected , remove the closed screw within working elements and a screw plug in the increase in the oil port , so that two oil outlets the amount of oil is incorporated into an oil outlets.

Note: the combined amount of grease or oil the work elements arranged in the prescribed amount of oil in the next elements (see schematic drawing) . Merge two oil port fuel supply still can not meet the needs, and method of drawing A4 can be chosen to increase three-way or two-way bridge joints, to bring together the amount of grease to meet the needs of several ports.

Ordering code:

JQPS(D) Grease Lubricant Distributor Specification:

Model	Element code	Nominal pressure (bar)	Grease feeding (ml/time)	Outside dimensions of inlets (mm)	Outside dimensions of outlets (mm)	Weight (kg)
JPQS	M1	16	0.10	10:8	8:6	0.485
	M1.5		0.15
	M2		0.20
	M2.5		0.25
	M3		0.30
	M4		0.40
KPQD	M1 M1.5		0.35 0.55	10	10:8	0.812
	M2		0.75
	M3		1.0

Note: the use of media as cone penetration of 250 ~ 350 (25℃ 150g) 1/10mm grease

Grease Lubricant Distributor Of JPQS (D) Series Dimensions:

MODEL	L	A	H	B	A1	D ( Bolt)
JPQS	(Middle element +2)x20	( Middle element +1)x20	55	45	22	M5x50
JPQD	( Middle element +2)x25	( Middle element +1)x20	80	60	34	M6x65

Description : Progressive distributor top block A combination of components at the inlet ,middle element M and end element E, from left to right, in the queue below exports is left side , in the queue below exports is right side, please check the above figure.

Grease Lubricant Distributor Of JPQS (D) Series Working Principle:

Drawing A1, the pressure oil from the oil inlet into the distributor, the oil from the left channel of the piston to the "A" into the left chamber of the piston to the "B" , "C" of the piston is pushed to the right , the piston " B " the right chamber of the oil through the right channel of the piston to the "A" from the oil port "1 " output , while the left channel of the piston to the "B" is turned on , the oil enters the left chamber of the piston to the "C" , the piston "C" is pushed to the right, the right channel of the right chamber of the oil by the piston to the "B" from the oil port " 2" output . The left channel of the piston to the "C" is turned on, the right chamber of the oil into the piston of the "A" (see drawing A1) "A" of the piston is pushed to the left , the left chamber of the piston "A" oil was purified by column plug "C" in the right channel, from the port " 3 " output.

Drawing A2, line in example ejection , when the piston "B" "C" is pushed to the left , the piston , the "B " " C " left chamber of the oil through the piston " A," " B , " the left channel from outlet port " 4" " 5 " output , while the right channel of the piston to the "C" is turned on , the oil through the right channel into the left chamber of the piston to the "A" , "A" of the piston is pushed to the right , the right chamber oil through the left channel of the piston to the "C" , from the oil port " 6" output.

Drawing A2, according to the above oil steps to complete the cycle of an oil, the oil port every order quantitative oil , again and again.

Drawing A3, progressive distributor in use, can be implemented monitoring, users need to monitor with touch lever (with monitor) stated after the mark.

Note before ordering the JPQS (D) grease lubricant distributor

Increasing the distributor when in use, can be implemented monitoring, user if requires monitor, can be noted that requires band monitor with the distributor.