High Pressure Grease Pumps from China manufacturer

Payment Terms:	T/T,L/C,D/A,D/P,WU
Place of Origin:	Zhejiang, China (Mainland)


	Add to My Favorites
HiSupplier Escrow	Share \|

Product Detail

Model No.: HB-P Series -211015

Production Capacity: 500

Delivery Date: Depending quantity

Certification: Others

Product: HB series of 1.1KW-2.2KW po...

Operation pressure: 400 / 200bar

Motor power supply: 1.1 or 2.2kw

Operation temperature: 10~70℃

Warranty: One year guaranty

Means of Transport: Ocean,Land,Air

Packing: Standard packing for export...

Type: Others

Brand Name: EGMEC

Ordering code: HB-P200Z/ 400Z/ 800Z series

Motor voltage: 380V

Tank Volume: 60L to 100L

Quality control: 100% Testing before deliver...

Medium: The cone penetration not le...

1. Apply for many lubrication points and distribution of a wide range
2. Operation pressure is max to 40bar
3. Large reservoir volume adopt

Brief introduction:

The 400bar/5800psi High Pressure Lubricating Grease Pump are suitable for lubrication points, with a wide range of distribution, to the high frequency of grease, nominal pressure 40 (20MPa) in single or dual-line dry ( lean) oil lubrication system, as a lubricant supply device can also be equipped with a mobile trolley oil, hose, oil gun and cable mobile electric lubrication pump device for use in low frequency, less lubrication points to the large amount of oil and not easy to centralized lubrication stand-alone device, move to the grease , the grease storage barrel set grease level automatic alarm device, if accompanied by a corresponding electrical control box also achieve automatic control and monitor the system.
Lubricating Oil Pump

400bar/5800psi High Pressure Lubricating Grease Pump

Ordering code:

HB – P 200 G - A

HB= Lubrication Grease Pump

P= 400bar ; D= 200bar

200= Grease feeding: 200mL/min; 400mL/min; 800mL/min

G= Medium: Grease

Outline type= A type; B type; C type; D type

Technical data:

Model	Pressure (bar)	Grease feeding (mL/min)	Reservoir (L)	Motor power (kW)	Voltage (V)	Weight (kg)
HB-P200Z	400(200)	200	60	1.1	380	280
HB-P400Z		400	60\100	1.1		328
HB-P800Z		800	100	2.2		405

The use of medium for the cone penetration not less than 220 (25 ° C, 150g) 1/10mm grease (NLGI0 # ~ 3 #) not less than N68 lubricant viscosity grade.

400bar/5800psi High Pressure Lubricating Grease Pump of HB-P series Outline Dimensions:

How to use the HB-P series 400bar/5800psi High Pressure Lubricating Grease Pump:

1. Lubrication pump should be installed vertically and fixed for easy maintenance and less dust, and pay attention to the operating temperature range of -20 ° C to +65 ° C ambient temperature suitability pump.

2. The pump as installed in the lubrication system center position to shorten the system the length of the pipe, to maintain a minimum pressure drop, in order to ensure that the pump generates a pressure sufficient to overcome the back pressure of the lubricating points.

3. The motor shall rotate in a clockwise direction

4. The pump must use clean grease, lubricant containing impurities is often the main reason for failure of pumps and system, use electric pumps to the grease storage tank supplemental lubricant from electric lubrication pump grease filling port. Pump before initial filling grease, a good idea to add some lubricants, liquid lubricants will be filled with all the parts, is conducive to exclude air. The lubricating parts if not use lubricant, the pump must be running to grease reaches the end of the pipe until the presence of air.

5. Gear box should be filling 50 # mechanical standard indicated level before the grease pump operation.

6. The pipelines, especially from the pipeline to the oil to the lubrication points and lubricating parts bearing should advance filled with lubricating grease, and then install it.

7. The HB-P series of electric lubrication pump is available for indoor installation, protection way must be taken to use the outdoor or harsh environment applications..