Portable Lubrication Grease Pump from China manufacturer

Payment Terms:	T/T,L/C,D/A,D/P,WU
Place of Origin:	Zhejiang, China (Mainland)


	Add to My Favorites
HiSupplier Escrow	Share \|

Product Detail

Model No.: DB-63 Series -211007

Production Capacity: 600

Delivery Date: Depending quantity

Certification: Others

Product: DB Series of single line lu...

Nominal pressure rate: 100bar

Grease feeding: 63ml/min.

Medium: The cone into the degree of...

Motor speed: 1400r/min

Means of Transport: Ocean,Land,Air

Packing: Standard packing for export...

Type: Others

Brand Name: EGMEC

Pressure measurement range: Within 0.1MPa ~ 200MPa

Pressure valve adjustment: 0-100bar

Grease tank volume: 8L

Motor power supply: 0.25kw

Application: Without cart for DB series

1. Application for single line lubrication system
2. With or without portable cart optional
3. Low operation noise, long service life

Brief introduction:

The DB series of 0.25Kw Motor Power 63ml/min Flow Single Line Portable Lubrication Grease Pump are used to the lubrication frequency is low, nominal pressure of 10MPa, the lubrication cycle is longer or equipment scattered lubrication points, lubrication points, 80 points below the single line of small dry oil lubrication system, through the chip to the oil or grease gun to lubrication points Feeding grease especially suitable for the transport machinery and equipment of the port.

Ordering code:

DB – 63

DB= Single Line Grease Pump
Z= With cart

63= Grease feeding 63mL/ min.

Technical data:

Model	Pressure rate(bar)	Grease feeding(mL/min.)	Reservoir volume (L)	Piston diameter (mm)	Piston numbers	Motor			Weight (kg)
						Model	Power (Kw)	Speed (r/min)
DB-63	100	63	8	8	4	A06324	0.25	1400	23
DBZ-63									52

The use of media for Cone Penetration degree of 250 to 350 ( 25 ° C , 150g) the 1/10mm grease ( NLGI0 # -2 #) .

Produce Dimensions:
0.25Kw Motor Power 63ml/min Flow Single Line Portable Lubrication Grease Pump

How to use the DB series

0.25Kw Motor Power 63ml/min Flow Single Line Portable Lubrication Grease Pump

1. The singlet dry pump should be installed in a suitable ambient temperature, little dust, easy to fill the grease, adjustment, inspection and maintenance are all convenient occasions.
2. First deceleration box to add one liter No. 50 machine oil before operation.
3. Fill grease to the inside of the oil storage must use the SJB-D60 manual pumps or DJB - 200 electric fuel pumps from the oil storage refueling port , oil storage inside. Forbidden to start the 0.25Kw Motor Power 63ml/min Flow Single Line Portable Lubrication Grease Pump without grease

4. Connection the electronic line as per the the cover of the motor fan rotation indication, wiring shall not reverse.
5. The fuel filler of the filter should be cleaned regularly.
6. The pressure regulating valve on the pump can be adjusted in the range of 0 ~ 100bar, when in use must not exceed the pump 's nominal pressure of 100bar .
7. When the pump pressure fluctuations, fuel is abnormal, can unscrew the the deflated screw on the pump until the discharge air, grease normally overflow out to tighten the deflated screws.
8. In 0.25Kw Motor Power 63ml/min Flow Single Line Portable Lubrication Grease Pump should be kept in clean surroundings, uncovering fill grease to prevent dirt into the pump housing affecting the normal working is strictly prohibited.