Lincoln modular lubrication divider valve can also be divided into the block -type lubrication divider, and its main principle is the use of a minimum of the overall design of the block of the dispenser group, each side exit 3 outlets. Every corresponding two outlet has a piston is used to allocate and discharge grease diameter and the stroke of the piston determines the displacement of each of its stroke.
Comparing with the elements distributor, that the each pistonhas two target, oneis for prorated, the other is to control. Adjust the number of outlets, relative between two outlets plug can be removed, and one outlet plug.
Lincoln modular lubrication divider valve Specification:
Model | Nominal pressure | Oil feeding flow | Starting pressure | Outlet port | Weight |
SSV-6 | 30Mpa | 0.2 ml/Cycle | ≤1.5Mpa | 6 | 1.1kgs |
Note: Using the medium for the cone is greater than 265 (25 ℃, 150g) 1/10mm, (NLGI0 # -2 #) of the grease. Such as the use of oil, viscosity grade than N68.
Lincoln Modular Lubrication Divider Valve Code Explanation:
SSV–6–K
SSV= SSV series of lubrication divider valve
6= Numbers of outlets
K= With indicator; Without indicator if omit
Lincoln Modular Lubrication Divider Valve SSV6 Dimensions:
Model | A | Max. Medium Flow Rate(ml/min) |
SSV-6 | 60 | 200 |
1.Outlet injectors : φ6 (Installed with the blocks)
2. Maximum pressure loss 10-20bar when grease through the working cell at25 ℃ temperature.