Single Line Electric Grease Pump from China manufacturer

Payment Terms:	T/T,L/C,D/A,D/P,WU
Place of Origin:	Zhejiang, China (Mainland)


	Add to My Favorites
HiSupplier Escrow	Share \|

Product Detail

Model No.: DRB-J Series -211008

Production Capacity: 350

Delivery Date: Depending quantity

Certification: Others

Product: DRB Series of 100bar Low pr...

Nominal pressure rate: 100bar

Speed: 75 r/min or 100 r/min

Motor power supply: 0.37kw or 0.75 kw

Accumulator volume: 50mL

Means of Transport: Ocean,Land,Air

Packing: Standard packing for export...

Type: Others

Brand Name: EGMEC

Relatively Model: DRB-J60Y-H = U-25DL; DRB-J1...

Nominal flow rate: 60ml/min. or 195 ml/min.

Grease tank volume: 16L or 26L

Piping type: Circle type

Medium: 120CST lubricating grease v...

1. Operation pressure for 100bar lubrication systems
2. Large reservoir volume for grease
3. Suitable for machine friction part

Brief introduction:

DRB-J series electric grease lubrication pump is designed for nominal pressure 10MPa the two- jet concentrated
lubrication system, electric lubrication pump output lubricants assigned two distributor quantitative evacuation
Automatically by the input hydraulic pressure to the injection valve to open the check valve of the compressed air line to the lubricating oil –shaped oil and gas mist spray to the friction of the machinery and equipment parts.

It is particularly suitable for open gears pass dynamic the machine friction parts of the gear tooth surface, supporting roller , sliding rail surface lubrication.

10Mpa Low Pressure 60-195ml/min High Flow Rate Single Line Electric Grease Lubrication Pump

The DRB-J series electric grease lubrication pump is made up of oil reservoir, hydraulic valve, accumulator, electric motors and other components.

Piston pump motor drive from oil storage inhalation lubricating oil pressure to the hydraulic valve, valve has four interfaces, connect to external two oil pipes, and return pipes by main supplying pipe .
By hydraulic valve back to the oil pressure in the tubing to promote commutation alternately along two ports lubricating oil will be transported out, when an oil port pressure feed grease, and the other ports and oil storage is on unloading, the two ports of the accumulator with two valve oil exports and then so that the pipeline can be replenished in a timely manner for the change to the oil supply after the instant oil.

Symbol:

Ordering code:

DRB – J 60 Y -H

DRB= Single Line Grease Pump

J= Grease feeding 63mL/ min.

60= 60mL/min.

Y= Lubricating grease

H= Circle type

Technical data:

Model		Pressure rate (bar)	Grease feeding (mL/min.)	Reservoir volume (L)	Speed (r/min)	Accumulator (mL)	Motor power (kW)	Reduction ratio	Piping type	Reducer lubricant (L)	Weight (kg)
DRB-J60Y-H	U-25DL	100	60	16	100	50	0.37	1 : 15	Circle type	1	140
DRB-J195Y-H	U-4DL	100	195	26	75	50	0.75	1 : 20	Circle type	2	210

The use of media for 120CST lubricating oil viscosity value of not less than.

How to use the DRB-J series:

1.The series of electric lubrication pump should be installed in a suitable ambient temperature, less dust, small vibration, ventilation, drying, and easy up the grease oil, adjustment, inspection and maintenance convenient occasion.

2.The use of the outdoor or harsh environmental conditions occasions, protective measures should be taken.

3.Filling oil in the oil reservoir, the DJB-V70 -type or DJB-V400 electric fuel pumps should be used, lubrication pump supply port injection. (Replenishment port built filter).

4.Reducer chamber to the pump lubrication pump operation before filling oil ( Industrial gear oils N220) to reach the required oil standard level the, reducer cavity lubricant put into use in the lubrication pump 200 hours, should be checked every 200 hours after replacement

5.Lubrication pump rotation direction is unidirectional, and must use the wiring to the licensing requirements of the spin motor rotation.

6.Pump relief valve set pressure can by changed in any adjustment in the range of 0 ~ 10MPa, nominal pressure in use does not allow more than 10 % ( 11MPa ).